Fitting Universal Child Seat - Ford KA Owner's Handbook Manual

069-084 Ford KA EN:065-080 Ford KA IT
All child restraint devices must bear
the certification data, together with the
control mark, on a label solidly fixed to
the seat which must never be removed.
Over 1.50 m in height, from the point
of view of restraint systems, children
are considered as adults and wear the
seat belts normally.
Lineaccessori Ford includes child seats
for each weight group.
These devices are recommended having
been specifically designed for Ford cars.
74
14-10-2010 11:28 Pagina 74
fig. 5

FITTING UNIVERSAL CHILD SEAT

(WITH SAFETY BELTS)
GROUPS 0 and 0+
Babies up to 13 kg must be carried
facing backwards on a cradle seat,
which, supporting the head, does not
induce stress on the neck in the event
of sharp decelerations.
The cradle is restrained by the car seat
belts, as shown in fig. 5 and in turn
it must restrain the child with its
own belts.
The figures are only examples for fitting purposes.
To install the child restraint, refer to the instructions supplied with
the same. Some child restraint systems for weight group 0 and 1 have a rear
attachment to the car seat belts and its own seat belts for securing the child.
Due to their weight, they may be dangerous if incorrectly mounted (e.g. if
fastened to the car seat belts with a cushion in between). Follow the assembly
instructions carefully.
KA00048m
fig. 6
GROUP 1
From 9 to 18 kg of weight, children may
be carried facing forward. Some types
of seat are equipped with a front
cushion that enables the car seat belt
to restrain both child and seat fig. 6 .
WARNING
KA00049m