JVC UX-L46V Service Manual page 6

UX-L46V/UX-L36V
Removing the Rear cover
Remove the metal cover.
1. Remove the two screws C retaining the rear cover.
Removing the Rear panel
Remove the metal cover and the rear cover.
1. Remove the twelve screws D
panel. Release the two joints a on the rear side and
the joint b on each side.
2. Disconnect the wire from connector CN919 on the
main board of the body.
The rear panel comes off with the microphone
volume board.
Removing the mic volume board
Prior to performing the following procedure, remove
the metal cover, rear cover and the rear panel.
1. Remove the two screws E retaining the mic volume
board on the back of the rear panel.
2. Disconnect the wire from connector CN919 on the
main board.
1-6
(See Fig.5)
(See Fig.6,7)
retaining the rear
(See Fig.7)
C
Fig.5
D
a
D
D
D
b
Fig.6
Main board
CN919
Microphne volume board
Fig.7
C
a
D
D
b
E