Table of Contents
Advertisement
UX-L46V/UX-L36V
Removing the CD mechanism assembly
Prior to performing the following procedure, remove
the clamper base / tray and the CD servo board.
1.
Remove the screw E attaching the CD mechanism
assembly.
2.
Move the CD mechanism assembly backward to
release the two joints c of the CD base on the front
side.
CAUTION:
When reassembling, fit the front part of the
CD mechanism assembly to the two
chassis joints c and attach the four
dampers correctly.
1-18
(See Fig.9,10)
CD mechanism assembly
damper
damper
c
E
c
Fig.9
CD mechanism assembly
CD base
Fig.10
damper
damper
E
Advertisement
Table of Contents
