JVC UX-L46V Service Manual page 17

Removing the clamper base / tray
1. Bring up the fitting in the direction of the arrow to
release the three joints b.
2. On the front side of the body, move the cam plate
lever to the center.
3. Remove the stopper screw C and pull out the tray
toward the front.
4. Remove the four screws D attaching the clamper
base.
5. From the rear side, remove the clamper base
upward.
(See Fig.6~8)
Joint b
Tray
Fig.6
Tray
Clamper
Fig.7
D
C
D
Tray
Fig.8
UX-L46V/UX-L36V
Fitting
Joint b
Cam plate
(Lever)
Clamper base
D
1-17