Board; Boards - Sony HDCAM HDW-F900 Maintenance Manual

2-5. Plug-in Board Removal and Installation
2-5-3. DA-148 Board
n
When drawing out the DA-148 board, refer to Section 2-5-
5 "General Information of Plug-in Board Removal and
Installation".
1. Draw out the DPR-152 board .
(Refer to Section 2-5-2.)
2. Draw out the DA-148 board.
Note for installation
. When installing the DA-148 and DPR-152 boards, refer
to Section 2-5-5 "General Information of Plug-in Board
Removal and Installation".
. When installing the DPR-152 board, with the heat pipe
lifted up, insert the DPR-152 board.
. When installing the CN-1940 and CN-2085 boards, align
the connector position and insert them carefully and
securely.
2-16
2-5-4. IF-819, SV-218, SY-285 Boards
n
When drawing out the plug-in boards, refer to Section 2-5-
5 "General Information of Plug-in Board Removal and
Installation".
1. Draw out the DPR-152 board .
(Refer to Section 2-5-2.)
2. Draw out the CN-2044 and CN-2078 boards in the
arrow direction.
SV-218 board
IF-819

board

3. Draw out the IF-819, SV-218 and SY-285 boards.
Note for installing
. When installing the plug-in boards, refer to Section 2-5-
5 "General Information of Plug-in Board Removal and
Installation".
. When installing the relay boards (CN-2044, CN-2078,
CN-1940 and CN-2085), align the connector position
and insert them carefully and securely.
. When installing the DPR-152 board, with the heat pipe
lifted up, insert the DPR-152 board.
SY-285 board
CN-2078 board
CN-2044
board
HDW-F900 P1