DURKOPP ADLER 887 Instruction Manual page 58

6.1.3.3 DC1550/DA321G drive
Parameter
290*
111
170
Parameter
290*
111
170
22
Parameter change for machines with gear rate of 28/28 teeth
Original value New value
0
-
-
Parameter change for machines with gear rate 18/28 teeth
Original value New value
0
-
-
Attention:
To set up parameters higher than 200, it is necessary to enter the
control in the programmer's level (via 3312 code). This allows also
entering parameters lower than 200.
Parameter description
3 Class of the machine
- Max. sewing speed
- Reference position
Parameter description
4 Class of the machine
- Max. sewing speed
- Reference position
* The parameter must be entered first.