Setting The Stitch Length; Starting Up The Manually Controlled Machine With A Clutch Motor - DURKOPP ADLER 887 Instruction Manual

6.11 Setting the stitch length

6.12 Starting up the manually controlled machine with a clutch motor

–
Turn the button (1) so that the number (2) indicating the required
stitch length in mm is opposite the mark (3).
–
Switch on the motor (1) with a switch (2) – the drive motor operates
permanently.
–
Tread the pedal (3). The motor friction clutch gets switched and the
sewing machine starts running.
–
Regulate the sewing speed by the pressure on the pedal (3).
Dependent on this pressure, the clutch slip changes and
subsequently the machine speed as well.
–
Release the pedal (3). The sewing machine stops.
3 2 1
GB
2
1
3
19