Preset Tuning; Ac Power Resume Function - JVC FR-DS100 Instructions Manual

Preset Tuning

This function provides instant access to the preset
frequencies or broadcasters stored in memory.
However, it cannot be performed if you do not have
any presets stored in memory. To preset stations,
refer to "Presetting WS broadcasters and radio
stations" on page 12.
1
Select the WS band or a radio band.
WS
or
2
Press PRESET– or PRESET+ to select a stored
preset.
When pressing PRESET+, if the maximum preset
number is reached, the order starts over again at
PRESET 1. Similarly, when pressing PRESET–,
PRESET 1 continues in reverse order to PRESET
20.
To cancel a preset
1
Select the preset to be cancelled.
2
Press and hold MEMORY/CANCEL for three
seconds or more until the CANCEL indicator
lights in the display and the PRESET indicators
blinks.
MEMORY
/ CANCEL
=
3
Use PRESET–/PRESET+ to select the preset to be
cancelled.
If neither button is pressed for 5 seconds, the
CANCEL indicator disappears from the display
and the mode is exited.
PRESET
4
PRESS MEMORY/CANCEL again.
"CANCEL" appears in the display. The preset is
cancelled, and the preset number is skipped
during preset tuning.
MEMORY
/ CANCEL
=
BAND
PRESET
CANCEL PRESET
PRESET

AC power resume function

When using an AC power supply and the power
supply is turned off during operation, if the power is
turned on again within a period of up to 2 days, the
unit is turned on and the last station received is
instantly tuned. This function is convenient for
making timed recordings of broadcasts using a
commercially available audio timer.
Note
The AC power resume function does not work if the power
is turned off by pulling the AC power cord out of the back of
the unit.
13