Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker Pivot Driver™ has been designed for protected supply. Use of an RCD reduces the risk of screwdriving applications.
e. Maintain power tools. Check for misalignment or Use clamps or another practical way to secure and ◆ binding of moving parts, breakage of parts and any support the workpiece to a stable platform. Holding the other condition that may affect the power tools work by hand or against your body leaves it unstable and operation.
Additional safety instructions for batteries and If the supply cord is damaged, it must be replaced by the ◆ chargers manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. Batteries Overview Never attempt to open for any reason. ◆...
Selecting the direction of rotation When screwing in wood, it is recommended to drill a pilot ◆ hole with a depth equal to the length of the screw. For tightening screws, use forward (clockwise) rotation. A pilot hole guides the screw and prevents splintering or For loosening screws use reverse (counterclockwise) rotation.
Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.