Protecting The Environment; Ec Declaration Of Conformity - Black & Decker Pivot Driver PP360 User Manual

Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
z available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
Run the battery down completely, then remove it from
u
the tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
u
to any authorised repair agent or a local recycling station.
(Original instructions)
Technical data
Voltage
No-load speed
Max. torque
Bit holder
Weight
Battery
Voltage
Battery type
AHr rating
Charger
Input voltage
Charging rate
Approx. charging time
Level of sound pressure according to EN 60745:
Sound pressure (L ) 63.5 dB(A), uncertainty (K) 3 dB(A)
pA
Acoustic power (L ) 74.5 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to
EN 60745:
Screwdriving without impact (a
uncertainty (K) 1.5 m/s

EC declaration of conformity

%
MACHINERY DIRECTIVE
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-2
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
_
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
ENGLISH
PP360 (H1)
V 4.8
DC
min 180
-1
Nm 4
1/4" (6.35 mm)
kg 0.4
V 4.8
NiMH
1.2
V 230
AC
A 0.13
h 8-10
) 0.5 m/s ,
2
h, S
2
PP360
Kevin Hewitt
Vice-President Global Engineering
Berkshire, SL1 3YD
United Kingdom
19/01/2012
7