Panasonic KX-TD816CE Installation Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Telephone System
  5. KX-TD816CE
  6. Installation manual
Panasonic KX-TD816CE Installation Manual

Panasonic KX-TD816CE Installation Manual

Digital super hybrid system
Hide thumbs Also See for KX-TD816CE:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
Added and Changed Features for
Installation Manual and Programming Tables
Please read this manual first and then the Installation Manual.
In this manual, the last letter "CE" of each model number is omitted.
Digital Super Hybrid System
KX-TD816CE
KX-TD1232CE

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TD816CE

Summary of Contents for Panasonic KX-TD816CE

  • Page 1 Digital Super Hybrid System KX-TD816CE KX-TD1232CE Added and Changed Features for Installation Manual and Programming Tables Please read this manual first and then the Installation Manual. In this manual, the last letter “CE” of each model number is omitted.
  • Page 2 Warning Warning: Static sensitive devices are used. To protect printed circuit boards from static electricity, do not touch connectors indicated below. To discharge body static, touch ground or wear a grounding strap. Warning : Static sensitive connectors REMOTE SYSTEM INTER CONNECTION DISA DOORPHONE...

  • Page 3: Table Of Contents

    Table of Contents Added Features Section 1.4, Options Pay Tone Card (KX-TD189) ....................6 2-ISDN S0 Line Unit (KX-TD280)..................6 Section 2.4, Installation of Optional Cards and Units 2-ISDN S0 Line Unit Connection ..................6 Installing Expansion Unit (KX-TD280)................7 Pay Tone Card (KX-TD189) Installation ................
  • Page 4 Table of Contents [815] SMDR Output Mode....................40 [990] System Additional Information, Fields (27) through (35)........41 Changed Features Section 3, Features Direct Inward System Access (DISA)................. 44 Display, Call Information ....................44, 46 Do Not Disturb (DND)......................44 DSS Console (KX-T7240 / KX-T7040)................44 Message Waiting .........................

  • Page 5: Added Features

    Added Features...

  • Page 6: Section 1.4, Options

    Options Pay Tone Card (KX-TD189) Supports the Pay Tone service of the central office. While having a conversation with an outside party, your central office generates the pay tone so that the counting for fee starts for the call. 2-ISDN S0 Line Unit (KX-TD280) One KX-TD280 can be installed per system.

  • Page 7: Installing Expansion Unit (Kx-Td280)

    Installing Expansion Unit (KX-TD280) 1. Loosen two screws on the cover plate. 4. Loosen the outside screw and slide the Insert fingers into the slits to remove the cover to the right. cover plate. Slit Slit Outside screw 5. Secure the inside screw (included) to fix Note Any of the cover plates can be the cabinet to the main unit.
  • Page 8 Installing Expansion Unit (KX-TD280) 7. Insert the plug into a jack on the unit. 11. Fix the cords to the wall as shown so Connect an earth wire to the earth terminal that the front cover can be opened. on the extension expansion unit. ISDN Port No.1 ISDN...

  • Page 9: Pay Tone Card (Kx-Td189) Installation

    Pay Tone Card (KX-TD189) Installation (1) Installing to the Initial CO Line Card 1. Loosen eight screws to open the inside cover of the main unit. Note If any cards, units, or cords are installed in the main unit, remove them beforehand.
  • Page 10 Pay Tone Card (KX-TD189) Installation KX-TD1232 CO Line Card Pay Tone Card J200 Cut here J200 CO7,8 CO Line Card CO5,6 OPJPA ~ H CO3,4 Inside cover CO1,2 3. Put the inside cover back on the main unit and secure the screws. 4.
  • Page 11 Pay Tone Card (KX-TD189) Installation (2) Installing to the Optional 4-CO Line Unit The following procedures must be done before installing the 4-CO Line Unit (KX-TD180) to the main unit. 1. Loosen five screws located on the rear of the 4-CO Line Unit. 2.

  • Page 12: Section 3, Features

    Features udget Management Description Limits the telephone usage to a pre-assigned amount. For example, the limit may be the amount deposited at check-in of a hotel. If the pre-assigned limit is reached, the extension user cannot make further calls until he/she receives authorization from the operator.

  • Page 13: Charge Fee Reference

    Features harge Fee Reference Description Allows the pre-assigned display telephone user to view, clear charges and print out the data by SMDR. Charges are displayed per extension, CO line, account code, or the total of each can be referred to. Conditions •...

  • Page 14: Co Incoming Call Information Display

    Features O Incoming Call Information Display Description Provides the display proprietary telephone user with a preset CO line name if an incoming outside call is received. If the CO name is not assigned and the CO line is an ISDN line provided with CLIP (Calling Line Identification Presentation) feature, shows the caller’s telephone number and name on the display.

  • Page 15: Co Incoming Call Information Log

    Features O Incoming Call Information Log Description If the display digital proprietary telephone (KX-T7230 or KX- T7235) user cannot answer a call, the telephone automatically records the caller’s telephone number, name and the time. The user can call back the caller by checking the call log. This is available if such a telephone receives incoming outside calls from the ISDN line provided with the CLIP (Calling Line Identification Presentation) feature.

  • Page 16: Direct Dialing In (Ddi)

    Features Feature References Section 3, Features, CO Incoming Call Information Display Operation Reference DPT Features, —User Manual CO Incoming Call Information Log Lock CO Incoming Call Information Log Mode Operator Service Features, CO Incoming Call Information Log Lock Clear irect Dialing In (DDI) Description Provides an automatic direction of an incoming ISDN S0 line call to a specific extension.

  • Page 17: Emergency Call

    Features Programming References Section 4, System Programming, [420] ISDN DDI Service Assignment [610] ISDN DDI Number / Extension Number Transformation [990] System Additional Information, Fields (31) and (32) Feature References None Operation References Not applicable. mergency Call Description Allows the extension user to dial out a pre-assigned emergency number without seizing a CO line.

  • Page 18: Hotel Application

    Features OTEL APPLICATION Description Allows the operator to handle the front/operator services such as check-in / check-out, timed reminder (wake-up call). This operation is applicable to only the operator extension with a KX-T7235. heck-In / Check-Out Description Allows the operator to operate the check-in / check-out service. This feature can control the usage of an outside call by switching the Class of Service between primary and secondary, and count and print out the telephone charge and the other charges (such as...

  • Page 19: Timed Reminder, Remote (Wake-Up Call)

    Features Programming References Section 4, System Programming, [010] Budget Management [011] Charge Margin Rate [100] Flexible Numbering, Check-out ready [124] Hotel Application [423] Pay-Tone Assignment [601] Class of Service Feature References Section 3, Features, Budget Management Charge Fee Reference Operation References Operator Service Features, —User Manual Hotel Application...

  • Page 20: Smdr For Timed Reminder

    Features MDR for Timed Reminder Description Station Message Detail Recording (SMDR) automatically records detailed Timed Reminder information. It is printed out when the Timed Reminder starts and the alarm is not answered. To enable the printout, refer to the program [990] “System Additional Information, Field (36),”...

  • Page 21: Emergency Dial Number Set

    Manager Programming Emergency Dial Number Set Description Assigns emergency call numbers. Selection • Emergency dial location number: 1 through 8 • Telephone number: 16 digits (max.) Default All locations – Not stored Programming Enter 009. Display:Emergency Call Press NEXT. Display:Emergency NO?→...

  • Page 22: Budget Management

    Manager Programming Budget Management Description Assigns the charge limitation of a call on an extension basis. Selection • Jack number: KX-TD816 – 01 through 16, (-1 / -2), KX-TD1232 – 01 through 64, (-1 / -2), ( =all jacks, -1 = first part, -2 = second part) •...

  • Page 23: Charge Margin Rate

    Manager Programming Charge Margin Rate Description Assigns the margin rate of a telephone charge. Selection Margin (%): 0 through 999 Default Programming Enter 011. Display: Charge Margin Press NEXT. Display: Margin: 0% Enter a charge margin rate. To delete the charge limitation, press CLEAR. Press STORE.

  • Page 24: Charge Display Selection

    System Programming Charge Display Selection Description Assigns the initial display format of charge fee on a display telephone. Selection in Meter / in Charge Default in Meter Programming Enter 120. Display: Charge Meter Press NEXT. Display example: in Meter Keep pressing SELECT until the desired selection is displayed.

  • Page 25: Assignment Of Denomination

    System Programming Assignment of Denomination Description Assigns the Denomination required for your country. Selection 2 characters (Max.) Default none Programming Enter 121. Display: Denomination Press NEXT. Display example: Denomi.: KC Enter a 0-9, , #, SELECT, CLEAR, or none. To change the current entry, press CLEAR and the new characters. To enter characters, see Section 4.1.3 “Entering Characters.”...

  • Page 26: Charge Verification Assignment

    System Programming Charge Verification Assignment Description Assigns the extension which is allowed to refer or clear for the call information on the extension, CO line, account code, and the total. Selection • Jack number: KX-TD816 – 01 through 16, ( =all jacks) KX-TD1232 –...

  • Page 27: Charge Verification Id Code Set

    System Programming Charge Verification ID Code Set Description Assigns an ID code required to refer the charge information. Selection 4 digits (0000 through 9999) Default 1234 Programming Enter 123. Display: Charge ID Code Press NEXT. Display example: Code: 1234 Enter an ID code. To delete the current entry, press CLEAR.

  • Page 28: Hotel Application

    System Programming Hotel Application Description Assigns whether the hotel application is enabled or disabled. Selection Disable / Enable Default Disable Programming Enter 124. Display: Hotel Apply Asn Press NEXT. Display example: Hotel : Disable Keep pressing SELECT until the desired selection is displayed.

  • Page 29: User Password

    System Programming User Password Description Assigns the password required for entering the User Programming mode. In the User Programming Mode, any display proprietary telephone user in the system can set the following programs: [000] Date and Time Set [001] System Speed Dialing Number Set [002] System Speed Dialing Name Set [003] Extension Number Set [004] Extension Name Set...

  • Page 30: Message Waiting Ring Interval Time

    Timer Programming Message Waiting Ring Interval Time Description Sets the Message Waiting ring interval time for a single line telephone. Selection Time (minutes) : 0 through 64 Default 10 min Programming Enter 216. Display: MW Ring Time Press NEXT. Display example: Interval: 10 min Enter the time.

  • Page 31: Timed Reminder Alarm Repeat Times

    Timer Programming Timed Reminder Alarm Repeat Times Description Sets the number of times Timed Reminder alarm is tried. Selection Number of times : 1 through 5 Default 3 times Programming Enter 217. Display: Alarm Times Press NEXT. Display example: Attempt:3 Enter the time.

  • Page 32: Timed Reminder Alarm Interval Time

    Timer Programming Timed Reminder Alarm Interval Time Description Sets the Timed Reminder alarm interval time. Selection Time (seconds) : 30 through 240 Default 60 sec Programming Enter 218. Display: Alarm Interval Press NEXT. Display example: Interval: 60 sec Enter the time. To change the current entry, press CLEAR and enter the new time.

  • Page 33: Co Line Name Assignment

    CO Line Programming CO Line Name Assignment Description Used to name CO lines. The preset name is shown on a display proprietary telephone when an incoming outside call is placed to the telephone. Selection • CO line number: KX-TD816 – 01 through 08, ( =all CO lines) KX-TD1232 –...

  • Page 34: Isdn Line Number Assignment

    CO Line Programming ISDN Line Number Assignment Description Assigns your telephone number of the ISDN network line. Your telephone number is informed to the called party with the CLIP (Calling Line Identification Presentation) feature offered by the ISDN network service. Selection •...

  • Page 35: Isdn Outgoing Clir Service Assignment

    CO Line Programming ISDN Outgoing CLIR Service Assignment Description Assigns whether ISDN CLIR (Calling Line Identification Restriction) service is enabled or disabled for outgoing outside calls. If disabled, the subscriber’s number of your system is informed to the called party. Selection •...

  • Page 36: Isdn Ddi Service Assignment

    CO Line Programming ISDN DDI Service Assignment Description Enables or disables ISDN DDI service per CO line. Selection • CO line number: KX-TD816 – 05 through 08, ( =all CO lines) KX-TD1232 – 09 through 12, 21 through 24, ( =all CO lines) •...

  • Page 37: Pay-Tone Assignment

    CO Line Programming Pay-Tone Assignment Description Enables Pay-Tone for the CO lines. Selection • CO line number: KX-TD816 – 01 through 08, ( =all CO lines) KX-TD1232 – 01 through 24, ( =all CO lines) • Enable / Disable Default All CO lines –...

  • Page 38: Isdn Ddi Number / Extension Number Transformation

    Extension Programming ISDN DDI Number / Extension Number Transformation Description Used to convert a DDI number to an extension number in order to put an incoming DDI call to a specific extension. Selection • Jack number: KX-TD816 – 01 through 16 (-1 / -2), KX-TD1232 –...

  • Page 39: Isdn Ddi Number / Floating Number Transformation

    Extension Programming ISDN DDI Number / Floating Number Transformation Description Used to convert a DDI number to an floating number in order to put an incoming DDI call to a specific floating station. Selection • Floating Station : KX-TD816 – Operator / Pager 1 KX-TD1232 –...

  • Page 40: Smdr Output Mode

    Resource Programming SMDR Output Mode Description Assigns the SMDR Output Mode. There are two standards available – Regular and Charge. Selection Regular / Charge Default Regular Programming Enter 815. Display: SMDR Output Mode Press NEXT. Display example: SMDR:Regular Keep pressing SELECT until the desired selection is displayed.

  • Page 41: System Additional Information, Fields (27) Through (35)

    4.10 Option Programming System Additional Information Description Field (27) is added to Area 4, (28) through (33) are added to Area 5 and (35) is added to Area 6. Area 4 KX-TD1232 – [17] through [24] below match CO lines 17 through 24: Display 1111111000000000 example...
  • Page 42 4.10 Option Programming System Additional Information (contd.) Explanation for Area 5 and 6 Selection Reference Default Description Field (28) ISDN Layer 1 active mode 0 : By call 1 : Permanent None (29) ISDN Data Link mode 0 : By call 1 : Permanent None (30) ISDN TEI mode...

  • Page 43: Changed Features

    Changed Features...

  • Page 44: Direct Inward System Access (Disa)

    ECTION OF EATURE ITLE EVISION ANUAL Section 3 Direct Inward System Disconnected Access (DISA) after 5 seconds. This timer can be changed to 0 second by program [990] “System Additional Information, Field (35).” Section 3 This feature has been replaced with a new one. For Display, Call details, refer to page 46.

  • Page 45: Dial Start Time

    ECTION OF EATURE ITLE EVISION ANUAL [109] Section 4 This program has been replaced with a new one. Expansion Unit Type For details, refer to page 55. [211] Dial Start Time Section 4 Default 500 ms Section 4 [412] Pause Time Default All CO line groups —...
  • Page 46 Features isplay, Call Information Description A display-type proprietary telephone shows the user the following call information: Extension number and name These are shown when calling or when called by an extension user and during an established intercom call. A display example: 123: Smith Dialed telephone number This is shown when dialing the telephone number.

  • Page 47: Message Waiting

    Features [121] Assignment of Denomination [212] Call Duration Count Start Time [417] CO Line Name Assignment [423] Pay-Tone Assignment Station Programming............User Manual Charge Fee Reference – New Rate Set Feature References Section 3, Features, Charge Fee Reference Operation References DPT Features, —User Manual Display Call Information essage Waiting...

  • Page 48: Station Message Detail Recording (Smdr)

    Features Feature References Section 3, Features, Dial Tone, Distinctive Voice Mail Integration Operation References DPT Features, SLT Features; —User Manual Message Waiting tation Message Detail Recording (SMDR) Description Station Message Detail Recording (SMDR) automatically records detailed call information for outside calls. A printer connected to the EIA (RS-232C) port can be used to print incoming and outgoing outside calls as well as print a hard copy of System Programming.
  • Page 49 Features An example of a printed charge call record: When selected for charge by Program [815] “SMDR Output mode” and selected for charge display by program [120] “Charge Display Selection.” Date Time Ext CO Dial Number Duration Cost Acc code 06/24/96 10:03AM 101 01 12345678901234567890...
  • Page 50 Features Example of SMDR printout format: Explanation (1) Date : shows the date of the call as Day / Month / Year. (2) Time : shows the end time of a call as Hour:Minute / AM or PM. (3) Ext : shows the extension number, floating number, etc. that engaged in a call.

  • Page 51: Section 4, System Programming

    Features • If the system clock is not set by System Programming or if the calendar IC is out of order, the date and time is not printed out. • If FLASH Signal is manually sent out during a conversation, the call record is printed and a new record is started.

  • Page 52: System Speed Dialing Number Set

    Manager Programming System Speed Dialing Number Set Description Used to program the System Speed Dial numbers. These numbers are available to all extension users. There are 500 numbers, from 000 to 499. Selection • Speed dial number: 000 through 499 •...

  • Page 53: Manager Programming

    Manager Programming System Speed Dialing Number Set (contd.) – To store a pause, press PAUSE. (Refer to Section 3 “Pause Insertion, Automatic.”) – To store the feature number to convert pulse signals to DTMF signals, press the # keys. (Refer to Section 3 “Pulse to Tone Conversion.”) –...

  • Page 54: System Speed Dialing Name Set

    Manager Programming System Speed Dialing Name Set Description Assigns names to the system speed dial numbers assigned in program [001] “System Speed Dialing Number Set.” The large display telephone (KX-T7235) shows the stored name when performing System Speed Dialing. Selection •...

  • Page 55: Expansion Unit Type

    System Programming Expansion Unit Type Description Assigns the type of expansion units to be used in the system. This allows the system to identify the unit in each expansion location. Selection KX-TD816 • Areas 1; 2 = C (4CO) / S (2S0) / E (EXT) KX-TD1232 •...

  • Page 56: System Programming

    System Programming Expansion Unit Type (contd.) Press STORE. If only one system is in operation, go to step 8. Press NEXT to program the Slave System. Display example: Slave: C; E1; E2 Repeat steps 3 through 7. Press END. Conditions •...

  • Page 57: Class Of Service

    Extension Programming Class of Service Description Programs each extension for a Class of Service (COS). The COS determines the call handling abilities of an extension. Primary and secondary COS numbers can be assigned per extension. Selection • Jack number : KX-TD816 – 01 through 16, (-1 / -2), KX-TD1232 –...

  • Page 58: Extension Programming

    Extension Programming Class of Service (contd.) Conditions • There is a maximum of eight Classes of Service. Every extension must be assigned to a Class of Service and is subject to the COS Programming programs [500] through [508] and [991]. •...

  • Page 59: Deleted Features

    Deleted Features EATURE ITLE ECTION OF THE ANUAL Caller ID 3 Features Calling Party Control (CPC) Signal Detection 3 Features 4.3 System Programming [110] Caller ID Code Set 4.3 System Programming [111] Caller ID Name Set [405] CPC Signal Detection Incoming Set 4.5 CO Line Programming 4.5 CO Line Programming [406] Caller ID Assignment...

  • Page 60: Programming Tables

    Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 61 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 62 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 63 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 64 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 65 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 66 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 67 Programming Tables [010] Budget Management Item : Item : Item : Selection Selection Selection Jack No. Jack No. Jack No. (01-22)-1 (45-64)-1 (22-44)-1 Enable Disable Enable Disable Enable Disable Default: all 22-1 44-1 all jacks 22-2 44-2 01-1 23-1 45-1 01-2 23-2 45-2...
  • Page 68 Programming Tables [100] Flexible Numbering [009] Emergency Dial Number Set Feature Default Parameter Parameter : 16 digits max., Item : consisting of 0 – 9 Location — Reserved Default : all - Not Stored — Emergency dial number 1 — Emergency dial number 2 —...
  • Page 69 Programming Tables [123] Charge Verification ID Code [122] Charge Verification Assignment Item : Item : Selection Selection Jack No. Jack No. Parameter: 4 digits Default Enable Disable Disable Enable (01 – 31) (32 – 64) (0000 through 9999) Default: all all jacks [124] Hotel Application Default...
  • Page 70 Programming Tables [419] ISDN [420] [417] [423] [418] Outgoing ISDN DDI CO Line Name Pay-Tone ISDN Line Number CLIR Service Service Assignment Assignment Assignment Assignment Assignment Selection Selection Item : Selection Parameter : Name Parameter : Telephone CO Line No. (10 characters max.) No.
  • Page 71 Programming Tables [601] Class of Service Parameter : Primary / Parameter : Primary / Parameter : Primary / Item : Item : Item : Jack No. Jack No. Secondary COS no.(1-8) Jack No. Secondary COS no.(1-8) Secondary COS no.(1-8) (01-22)-1 (45-64)-1 (22-44)-1 Primary...
  • Page 72 Programming Tables [610] ISDN DDI Number / Extension Number Transformation Parameter : Parameter : Parameter : Item : Item : Item : DDI No. (1-6 digits) DDI No. (1-6 digits) DDI No. (1-6 digits) Jack No. Jack No. Jack No. (01-22)-1 (45-64)-1 Default : all - Not Stored...
  • Page 73 Programming Tables [815] SMDR Output Mode [611] ISDN DDI Number / Floating Number Transformation Default Selection Parameter : Regular DDI No. (1-6 digits) Item : Charge Default : all - Not Stored Floating Station Change Operator Pager 1 Pager 2 Pager 3 Pager 4 DISA 1...
  • Page 74 Programming Tables [990] System Additional Information AREA 04 [Fields 23-(17) through 23-(24), 24, 25 and 27] Field reserved 27 unused 25 24 (24) (23) (22) (21) (20) (19) (18) (17) Default — — — 1 — — Selection AREA 05 [Fields 28 through 34 and 36] unused 32 31 30 29 28...
  • Page 76 Matsushita Electric of Industrial Co., Ltd. Central P.O. Box 288, Osaka 530-91, Japan Printed in Japan PSQX1168ZA S0796MT0 (CE)

This manual is also suitable for:

Kx-td1232ce

Table of Contents