Sharp MX-3110N Sales Manual page 86

M X - 3 1 1 0 N / M X -
M X - 3 1 1 0 N / M X -
Document control
Object judgment
(screen change / colour
change)
CMYK simulation
Control image profiles
Filter function on driver Image processing filter
ICC Profile
Pantone colour
Layout print
Binding with no line
Chapter inserts
2-colour printing
Expansion of margin
shift
Saddle staple support
WSD support
2 6 1 0 N S a l e s G u i d
2 6 1 0 N S a l e s G u i d
Print the document with a fixed pattern to avoid illegal
copy.
In the printer colour mode output, object of image data
(area of photograph / graphic text) is judged. Print
screen (resolution) and profile (colour) are changed
automatically.
Choice of CMYK simulation is as follows.
1. Default
2. Japan Colour
3. SWOP
4. Euroscale
5. Custom
The operation when "Default" is selected is the same as
the MX-2700 / 2300.
Custom profile can upload by Web setting.
Notation of driver is Custom.
Example:
- Use DIC authorization profile. When using SWOP
profile in Japan.
Profile selection function
USB download
Storing multi-profile to HDD
ICC profile (service web)
Exclusive use of normally profile A/B/C
<Source Profile>
Choice of source profile is as follows.
1. Gamma 2.2
2. Gamma 1.8
3. Gamma 2.0
4. Gamma 1.6
5. Gamma 3.0
6. Gamma 2.6
7. Custom (N/A for SAPL-c)
<Output Profile>
There is no user selection for output profile.
Sharp provides Custom profile. Upload of profile is
supported by service. The tool can be set on the Web
(service setting). The concrete method of profile making
is to be considered separately.
For Pantone colour support, the profile upload can be
made by Web setting.
The detail of Pantone support is decided by the license
agreement with Pantone co.
Layout supporting various printing applications.
To prevent bound pages from becoming thick, saddle
stitch printing is performed for a small number of pages.
Insert blank page automatically to entering 1
each chapter to odd page.
Print by black and either of C, M, Y, R, G, or B colour.
In the current model, the margin shift width setting
value can be changed per 10 mm. Change from 10 mm
to 1mm.
In the current model, imposition of images and stapling
are performed in saddle stitch printing.
However imposition is sometimes already performed in
the application etc. Therefore, the specification of
saddle staple only is added.
For premium logo. (Discovery function for printer)
e
e
Yes
(OPT)
Yes
No
Yes
TBD
Yes
No
Yes
No
st
page of
Yes
*1
Yes
Yes
Yes
Yes
(OPT)
Yes
Yes
Yes
TBD
Yes
Yes
Yes
No
No
No
Yes
No
No
86