Step 5: Quick Setup - Sony DVP-NS518P Operating Instructions Manual

Step 5: Quick Setup

Follow the steps below to make the minimum
number of basic adjustments for using the
player.
To skip an adjustment, press >. To return
to the previous adjustment, press .. The
on-screen displays differ depending on the
player model. Oceanian model is used for
illustration unless otherwise specified.
1
Turn on the TV then press [/1.
2
Switch the input selector on your
TV so that the signal from the
player appears on your TV screen.
"Press [ENTER] to run QUICK SETUP"
(press enter to run Quick Setup) appears
at the bottom of the screen. If this
message does not appear, select
"QUICK" (quick) under "SETUP"
(setup) in the Control Menu to run Quick
Setup (page 19).
3
Press ENTER without inserting a
disc.
The Language Setup Display appears.
The available languages differ depending
upon the player model.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
4
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
5
Press ENTER.
The Screen Setup Display appears.
14
ENGLISH
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
SCREEN SETUP
TV TYPE:
COLOR SYSTEM (VIDEO CD):
SCREEN SAVER:
BACKGROUND:
PROGRESSIVE
MODE
(PROGRESSIVE)
4:3 OUTPUT:
6
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 29)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 29)
7
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
8
Press X/x to select the type of jack
(if any) you are using to connect to
an audio component, then press
ENTER.
Select "NO," if you do not connect an
audio component, then go to step 12.
Select "YES: LINE OUTPUT L/R
(AUDIO)," if you connect an audio
component using an audio cable, then go
to step 12.
Select "YES: DIGITAL OUTPUT," if
you connect an audio component using a
digital coaxial cable.
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
: OFF
(COMPONENT OUT ONLY)
AUTO
:
FULL