Rds Clock Feature - Medion MD 42540 Manual

Autoradio MD 42540_AUS.fm Seite 14 Mittwoch, 30. November 2005 9:01 09
Operation
If no RDS or PTY information is received
screen. Each notice appears for just a few seconds.
MODE
• Press the MOD button (16) to switch between radio reception, CD/MP3
operation, USB connection and card reader.
Equalizer
• By pressing the EQ (6) button you turn on the equaliser and choose between
FLAT, CLASSICS, POP M, JAZZ or DSP OFF.
If FLAT is set, all equaliser settings are set to zero (0). DSP OFF means that
Digital Sound Processing (DSP) is switched off.
RESET
• To reset the car radio to the factory settings, press the
RESET button (21) with a pointed object, such as a pen.
• Press RESET (21)
before first use, after connecting the cable,
if not all function keys are working,
when an error message appears in the display.

RDS clock feature

Your car radio is fitted with an RDS controlled clock. The clock will be set
automatically while an RDS station is received.
Once the unit is switched off and the on again, it will take approximately one
minute for the clock time to be displayed again. The clock display will not show
while the radio is tuned to a non RDS station.
Reception of RDS signal and clock depends on location and signal strength.
14
NO CLOCK or NO PTY is displayed on the