JUKI MO-6700D Series Manual page 46

4
Portion of the setscrews of the dust-proof rubber case (JUKI seal)
Apply the sealant to the oil shield case setscrew
(4 pcs.)
5
Oil shield plate assembly (JUKI seal)
Apply the sealant to the inside of the oil shield plate
6
Portion of the feed mechanism cover (Three-bond 1212)
Apply the sealant to the rear face of the feed mechanism cover, the top surface of the oil shield plate,
the oil shield rubber support plate , the top surface of the oil shield case, and the hatched parts on the
top surface of the feed bar presser.
Apply the sealant to the
top surface of the oil
shield plate.
Apply the sealant to the oil shield rubber support
plate and the top surface of the oil shield case.
Be careful that the sealant should not overflow on
the side of the oil shield rubber.
7
Various sealants
Maker's name
Three Bond
Three Bond
Three Bond
JUKI exclusive part Nos. of the above 3 kinds of the sealants are not set.
Apply the sealant to
the hatched parts.
Inside contact surface
Apply the sealant to the frame.
Part No.
* * : It is commonly called "JUKI seal".
1104D
1104
1212
– 42 –
(1 pc.) and the dust-proof rubber case
.
Feed mechanism
cover (rear face)
Lightly apply the sealant to the rear
face of the feed mechanism cover
and the top surface of the feed bar
presser.
setscrews