JUKI MO-6700D Series Manual page 39

Adjustment Procedure
1) Close looper cover
guide plate back and forth until the looper cover is brought to a
position where the cover smoothly closes.
2) Move looper cover guide plate
with looper cover receiving bracket
tightening setscrew
Adjustment Procedure
1) Loosen setscrew
chip cover stopper
2) Loosen setscrews
nal position of cloth chip cover
3) Loosen setscrew
cloth chip cover stopper
in contact with looper cover
4) Finally, confirm that cloth chip cover
upper knife nor lower looper
, loosen setscrew , and move looper cover
until it slightly comes in contact
. Now, fix the guide plate by
.
and temporarily tighten the setscrew with cloth
raised.
in the cloth chip cover, and adjust the longitudi-
.
in the cloth chip cover stopper again, and press
downward until the stopper slightly comes
. Now, tighten setscrew
comes in contact with neither
.
Results of Improper Adjustment
Results of Improper Adjustment
.
– 35 –