Copying A Day - Honeywell T7200D Product Data

T7200D,E, T7300D,E,F AND Q7300 SERIES 2000 PROGRAMMABLE COMMERCIAL THERMOSTATS AND SUBBASES
5. Press increase or decrease
start time is displayed.
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
6. Press Unoccupied Start Time.
Unoccupied
Start Time
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System
7. Press increase or decrease
start time is displayed.
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
8. Press Unoccupied Start Time a second time to set a
second Unoccupied Start Time.
Unoccupied
Start Time
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System
9. Press increase or decrease
start time is displayed.
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan

Copying a Day

NOTE: The thermostat must be in program mode to use the
copy feature. Go to step 2. if the thermostat is
already in the program mode.
1. Press Occupied Start Time.
Occupied
Start Time
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
2. Press Day to select the day to be copied if different
from the day displayed.
Day
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
3. Press Copy.
Copy
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
63-4355—2
key until the desired
Set ProgramStart Time
PM
Wed
Occupied 2
M4959A
Set Program Start Time
PM
Change
Time/Temp
Wed
Un Occupied 1
Fan
M4960A
key until the desired
Set ProgramStart Time
PM
Wed
Un Occupied 1
M4961A
Set Program Start Time
Change
Time/Temp
Wed
Un Occupied 2
Fan
M4962B
key until the desired
Set ProgramStart Time
PM
Wed
Un Occupied 2
M4963A
Set Program Start Time
AM
Change
Time/Temp
Mon
Occupied 1
M4955A
Set Program Start Time
AM
Wed
Occupied 1
M4966A
Wed
M4967A
4. Press Day until the day to be copied to is displayed.
Day
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
5. Press Copy.
NOTE: donE will be displayed for two seconds and
then the program display is shown.
Copy
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System
6. Repeat steps 3 through 5 for all the days desired.
7. Press Run Program.
Run
Program
Set Program Set Temperature
Run Occupied Unoccupied Occupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied System
Setting Program Temperature Setpoints
NOTE: The setpoint temperature range is 40°F to 90°F
(7°C to 31°C) for heating and 45°F to 99°F (9°C to
37°C)
for cooling.
1. Press Occupied Temp.
Occupied
Temp
Set Program
Run Occupied Unoccupied Occupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied System
2. Press increase or decrease
temperature is displayed.
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
3. Press Heat/Cool Settings to change between heat and
cool settings.
Heat/Cool
Settings Set Program Set Temperature
Run Occupied Unoccupied Occupied
Program Start Time Start Time Day Temp
Temporary Set Current Clear
Occupied Day/Time Start Time Copy
Continous
Unoccupied System
4. Press increase or decrease
temperature is displayed.
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
18
Change
Time/Temp
Wed Thu
M4968A
Change
Time/Temp
Fan
M4969A
AM
Room
Change
Time/Temp
Unoccupied
Temp
Mon
Occupied 1
Heat/Cool
Settings
System Fan
Fan
Heat Auto
M4954A
Set Program Setting
Set Temperature Change
Time/Temp
Unoccupied
Heat
Temp
Occupied
Heat/Cool
Settings
Fan
M4970B
key until the desired
Set Program Setting
Change
Time/Temp
Heat
Occupied
M4971B
Set Program Setting
Change
Time/Temp
Unoccupied
Temp
Cool
Heat/Cool Occupied
Settings
Fan
M4972A
key until the desired
Set Program Setting
Change
Time/Temp
Cool
Occupied
M4973B