Copying One Day's Programme To Another Day - Honeywell ST9100C User Manual

PrOGrAmmING YOUr ST9100C
Note: When pressing the
This indicates you have tried to set a time equal to one of the next programme times
already in the memory. Similarly, when pressing the
OFF marker may start to flash. This indicates you have tried to set a time equal to
one of the previous programme times. If this happens the ST9100C simply moves
both times together as long as you continue to press the
the procedure in 'reviewing the Programme Times' (page 7) to check and adjust
these times as necessary.
c. 'SET OFF-TIME 1' will be displayed and the first OFF 1 time will now be flashing.
If you do not wish to change the time, press the green
next step. Otherwise, use the
green button to confirm the time is correct and move to the next step. 'SAVED'
will be displayed for a moment to confirm that any change has been saved to
memory.
d. The remaining ON and OFF times (ON 2, OFF 2, ON 3, OFF 3) can be set by
using the or
confirm the time is correct and move to the next step. If you do not wish to
change the time, just press the green
ON/OFF time without making any changes.
e. After setting or reviewing the last off time, OFF , the message 'COMPLETE' will
be displayed to indicate the times for Monday have been set.
You now have a choice of how to set the programme for the next day:
Copying one day's Programme to another day (example monday to Tuesday):
f. Whilst the day is showing Monday, Press the COPY DAY button. The message
'COPY MON TO TUESDAY OK?' will be displayed and the letters TUe will flash
to indicate the programme for Monday can be copied to Tuesday.
g. To select a different day to copy to, press the NeXT DAY button to cycle through
the days. With each press of the NeXT DAY button the message will change to
indicate the new day you are copying to.

button the next ON or OFF marker may start to flash.
or buttons to change the time. Press the
buttons to change the time, and the green
button the previous ON or
or buttons. Follow
button and move to the
button to move directly to the next
button to