Table of Contents
Advertisement
If tires are inexpertly re-
moved, the RDC sensors
may be damaged.
Inform the authorized
BMW Motorrad retailer or the
specialist service facility on the
fact that the wheel is equipped
with a RDC sensor.
On motorcycles equipped with
TPC/RDC, a corresponding
sticker is located on the wheel
rim at the position of the
TPC/RDC sensor. During a
tire change it must be ensured
that the TPC/RDC sensor
is not damaged. Inform the
BMW Motorrad retailer or the
authorized workshop of the
TPC/RDC sensor.
Removing front wheel
Make sure ground is level and
firm and place motorcycle on
its center stand.
Remove screws 1 on left and
right.
Pull out front wheel cover to-
ward front.
Unclip retaining clip 1 holding
the sensor cable to the brake
line.
Remove cable tie 2.
Mask off area of wheel rim that
could be scratched in process
of removing brake calipers.
8
119
z
Advertisement
Table of Contents
