Motorola PM1200 User Manual page 32

Radio Firmware Features
22. Audio Volume Attenuation
23. Scan Select
24. Group Scan Select
10.1 Toggle High/Low Power
Refer to "Power Level" on page 9.
10.2 Monitor
This feature allows you to listen to current channels of Conventional
dispatch type. Monitor mode places receiver in Carrier Squelch,
overriding receive PL (or CTCSS) signaling. This is a press-and-hold
feature, which is assigned to a PF Button. The "MON" icon appears
on the LCD when you press the assigned 'Monitor' PF button.
The 'Monitor' PF Button automatically sets the short press as quiet
monitoring and the long press as noise monitoring.
Both presses will override PL or Open, depending on setting.
10.3 Toggle Scan On/Off
The assigned button toggles between Scan On and Scan Off when
you press the assigned 'Toggle' PF button. The radio will sound and
"SCAN" will be displayed on LCD. Press the assigned 'Toggle' PF
Button again to enter Group Scan. "G SCAN" will be displayed on the
LCD, provided the radio is in the group which has been selected as
Group Scan member and there are more than two group scan
members programmed in this radio.
20