Selected Channel Priority - Motorola PM1200 User Manual

Radio Firmware Features

10.21 Selected Channel Priority

This feature checks user-assigned Priority Channel as you scan the
other channels. When you press the assigned 'Selected Channel
Priority' PF button, the current channel sets to the channel selector
knob is converted to Priority Channel and the radio enters scan
mode.
10.22 Audio Volume Attenuation
To set the audio output to the associated programmed level, press the
'Audio Volume Attenuation' PF button. Audio output will remain at this
level even if you attempt to change the volume level with the volume
control knob. The "normal" audio output level will resume when the
'Audio Volume Attenuation' PF button is pressed again. This feature
only applies to the external speaker.
10.23 Scan Select
Pressing the 'Scan Select' PF button allows the currently selected
channel to be included in or excluded from the scan list. When the
channel is included, "SCN" appears on the LCD. Scan Select can
only be assigned as a "long press PF button."
10.24 Group Scan Select
Pressing the assigned 'Group Scan Select' PF button allows the
group currently selected to be included or excluded as a Group Scan
member. When the group is included, "STOP_" is displayed on the
LCD. When the 'Group Scan Select' PF button is pressed again, the
current group is removed from the scan list and "SKIP_" is displayed
on the LCD. Group Scan Select can only be assigned as a "long
press PF button."
PM1200 Mobile Radio with Control Head 25