Pm1200 Mobile Radio With Control Head - Motorola PM1200 User Manual

PM1200™ Mobile Radio
with Control Head
Quick Reference Card
Product Safety and RF Exposure Compliance
Before using this product, read the operating instructions
!
for safe usage contained in the Product Safety and RF
Exposure booklet enclosed with your radio.
C a u t i o n
ATTENTION!
This radio is restricted to occupational use only to satisfy
FCC RF energy exposure requirements. Before using this
product, read the RF energy awareness information and
operating instructions on page ii .
LCD Channel
Power
Display Group Keys
Button
Volume
Channel
Emergency
Selector
Selector
Microphone
Knob
Knob
BASIC OPERATION
Turning the Radio On and Off
Push the Power Button to turn it on.
When the radio is powered on, the display shows the
name of the channel.
You will hear a high-pitched (good power-up)
tone.
If your radio shows an error on power-up, contact your
system manager for assistance.
Selecting Channel and Group
1 Press the Channel Group Keys to select the desired
Channel Group.
2 Turn the Channel Selector Knob to select the
desired channel.
Monitoring Conventional Modes
Press the preprogrammed Monitor PF Button.
The display will show "MON"
Cancelling Monitoring
Press the preprogrammed Monitor PF Button.
Receiving
1 Select the desired group and channel.
2 Turn the Volume Selector Knob to adjust the
volume.
Transmitting (Conventional Modes)
1 Select the desired group and channel.
PF Buttons
2 Turn the Volume Selector Knob to adjust the
volume.
3 When a mode becomes available, press and hold the
PTT button to transmit; release the PTT button to
receive.
LED INDICATIONS
Action LED Condition
Press the PTT Steady Red
button to
transmit
Receiving signal Solid Green
with TPL/DPL
enabled
Receiving signal Solid Green
with TPL/DPL
disabled
Scan landed on Solid Green
Rx Channel with
TPL/DPL
enabled
Scan landed on Solid Green
Rx Channel with
TPL/DPL
disabled
Turn at the Blinking Orange
Volume Selector
knob or Channel
selector knob
STATUS ANNUNCIATORS
Annunciator Indication
Quiet Monitor
All active traffic on the selected
channel in being monitored without
noise.
Noise Monitor
All active traffic on the selected
channel in being monitored with
(blinking)
noise.
Scan List Channel
The current selected channel is in
the scan list.
Meaning
Normal
transmission
Call received
Call received
Call received
Call received
Incorrect preset
position of the
Volume Selector
Knob & Channel
Selector Knob