Steering Trim - Team Losi LST XXL2 Instruction Manual

Maintenance and Trouble Shooting
Adjusting Steering and Throttle Trims
Throttle Trim
Adjust the TH. Trim so the carburetor is completely closed when the throttle trigger
is at neutral. If throttle can not be closed using TH. Trim, please take the following
steps:
1. Make sure TH. Trim knob is set to "0" or neutral.
2. Use needle-nose pliers or ball link pliers (RVO1005) to remove or install a link on
a control horn.
3. Turn the linkage clockwise or counterclockwise until the throttle is closed.
4. Attach the linkage to the control horn after adjustment.
NOTICE: Throttle trim change may affect engine operation. Carburetor settings must
be set correctly or damage may result.
See Engine Tuning for carburetor adjusments.

Steering Trim

The model should go straight without turning the steering wheel. If not, turn the
ST. Trim knob in the direction needed for the model to go straight.
12
Forward
2.7 in (68mm)
EN
Brake
LOSI LST XXL 2 • INSTRUCTION MANUAL