The Winterization Kit Components; Winterization Kit: Handling, Preventative And Corrective Maintenance; Description Of The Airplane And Its Systems; Handling, Preventive And Corrective Maintenance - Diamond DA20-C1 Manual

DA20-C1 Flight Manual
7.

DESCRIPTION OF THE AIRPLANE AND ITS SYSTEMS

The Winterization Kit consists of:
•
left and right baffles installed in the forward cowling inlets,
•
left and right baffles installed in the aft outlet opening of the lower cowling, and
•
a placard located on the cowling below the oil door.
The baffles reduce the flow of cooling air through the cowling, thereby increasing the operating
temperature of the engine. At moderate temperatures either the inlet or outlet baffles may be
installed. At lower temperatures both inlet and outlet baffles should be installed.
8. HANDLING, PREVENTATIVE AND CORRECTIVE MAINTENANCE
The inlet baffles are removed by unfastening two 1/4-turn fasteners on each baffle. The outlet
baffles are removed by unscrewing 5 attaching screws from the lower cowling. Store the
screws and washers in the baffle rivnuts and store baffles in the baggage compartment.
Doc # DA202-C1
Revision 24
April 16, 2009
Supplement 2
Page S2 - 4
DOT Approved