Presetting Stations; To Change The Fm Reception Mode - JVC RD-T50RLB Instructions Manual

Presetting Stations

You can preset up to 30 FM stations and up to 15 AM (MW) stations
into memory.
Auto Presetting (Using the Unit) —
In each band, you can automatically preset FM-30, AM (MW)-15 sta-
tions. Preset numbers will be allocated as stations are found, starting
from the station currently tuned to and moving up the frequency.
(Band select)
TUNER BAND
AUTO PRESET
I
1. Select a band (AM or FM) by pressing the
TUNER BAND button.
I
2. Press the TUNER BAND button for more
than 2 seconds.
"AUTO" appears, and then auto presetting starts.
I
3. Repeat steps 1-2 for the other band.
I
If you want to change any of the auto preset stations, follow the
procedure for Manual Presetting.
CAUTION: To prevent the preset stations from being
erased because of a power failure, etc., install mem-
ory backup batteries in the System.(See page 2.)
Otherwise, they will be erased in approx. half a day.
Manual Presetting (Using the Unit) —
TUNER BAND
MANUAL/
PRESET TUNING
AUTO PRESET
(for 2 sec)
MANUAL/
PRESET TUNING
I
1. Select a band by pressing the TUNER
BAND button.
I
2. Press the 7 button until "MANUAL (Manual
Tuning mode)" appears on the display.
I
3. Press the 4 or ¢ button to tune in a sta-
tion.
I
4. Press the 7 button for 2 seconds or more.
The preset number and band/frequency are alternately
displayed for 5 seconds.
I
5. Within 5 seconds, repeatedly press the 4 or
¢ button until the preset number you want
appears, then press and hold the 7 button
until "STORED" appears on the display.
I
6. Repeat steps 2-5 for further presetting.
To change the preset stations, repeat the same procedure as
above.
(Auto preset)
(for 2 seconds)
TUNER BAND
AUTO PRESET
(Station Select)
MULTI CONTROL
MANUAL/
PRESET TUNING
(Preset No. Select)
(Press & hold )
MULTI CONTROL
MANUAL/ MANUAL/
PRESET TUNING PRESET TUNING
Manual Presetting (Using the Re-
mote Control) [RD-T70RBU Only] ——
TUNER
BAND
MANUAL/
PRESET TUNING
(On the Unit)
I
1. Select a band by pressing the TUNER
BAND button.
I
2. Press the 7 button on the Unit until "MAN-
UAL (Manual Tuning mode)" appears on the
display.
I
4 ¢
3. Press the or
I
4. Set the preset number by pressing and hold-
ing the number key on the Remote Control
until "STORED" appears on the display.
• To preset numbers 1 to 10: Press the number key and hold
it down for 2 seconds.
• To preset numbers 11 to 19: Press the +10 button, then
press the second number key (1 to 9) and hold it down for 2
seconds.
• To preset numbers 21 to 29: Press the +10 button twice,
then press the second number key (1 to 9) and hold it down
for 2 seconds.
• To preset number 30: Press the +10 button twice, then press
and hold 10 button.
Example: Preset number = 12
I
5. Repeat steps 2 - 4 for further presetting.
To change the preset stations, repeat the same steps as above.
To Change the FM
Reception Mode
The "STEREO" indicator lights up and you can hear stereo effects,
when a program is broadcast in stereo.
However if an FM stereo broadcast is hard to receive or noisy, you
can select Monaural mode. Reception improves, but you lose any
stereo effect.
Press the TUNER BAND button to select FM
MONO mode.
The "MONO" indicator lights up on the display.
To restore the stereo effect, press the TUNER BAND button
to select FM Auto mode. The "MONO" indicator goes out.
Number key(s)
(hold for 2 seconds)
button to tune in a station.
6