Table of Contents
Advertisement
Presetting Stations
You can preset up to 30 FM stations and up to 15 AM stations into
memory.
Auto Presetting (Using the Unit) —
In each band, you can automatically preset FM-30, AM-15 stations.
Preset numbers will be allocated as stations are found, starting from the
station currently tuned to and moving up the frequency.
TUNER BAND
TUNER BAND
I
1. Select a band (AM or FM) by pressing the
TUNER BAND button.
I
2. Press the TUNER BAND button for more
than 2 seconds.
"AUTO" appears, and then auto presetting starts.
I
3. Repeat steps 1-2 for the other band.
I
If you want to change any of the auto preset stations, follow the
procedure for Manual Presetting.
CAUTION: To prevent the preset stations from being
erased because of a power failure, etc., install mem-
ory backup batteries in the System.(See page 2.)
Otherwise, they will be erased in approx. half a day.
Manual Presetting (Using the Unit) —
(Station Select)
TUNER BAND
(for 2 sec)
P.TUNING
P.TUNING
(Preset No. Select)
I
1. Select a band by pressing the TUNER
BAND button.
I
2. Press the 4 or ¢ button to tune in a sta-
tion.
I
3. Press the 7 button for 2 seconds or more.
The preset number and band/frequency are alternately
displayed for 5 seconds.
I
4. Within 5 seconds, repeatedly press the 7 but-
ton until the preset number you want
appears, then press and hold the 7 button
until "STORED" appears on the display.
I
5. Repeat steps 1-4 for further presetting.
To change the preset stations, repeat the same procedure as
above.
(for 2 seconds)
P.TUNING
(Press & hold )
P.TUNING
Manual Presetting (Using the Re-
mote Control) ————————————
TUNER
BAND
I
1. Select a band by pressing the TUNER
BAND button.
I
4
¢
2. Press the
or
button to tune in a station.
I
3. Set the preset number by pressing and hold-
ing the number key on the Remote Control
until "STORED" appears on the display.
•
To preset numbers 1 to 10: Press the number key and hold
it down for 2 seconds.
•
To preset numbers 11 to 19: Press and release the +10 but-
ton, then press the second number key (1 to 9) and hold it
down for 2 seconds.
•
To preset numbers 21 to 29: Press and release the +10 but-
ton twice, then press the second number key (1 to 9) and
hold it down for 2 seconds.
•
To preset number 30: Press and release the +10 button 2
times, then press and hold 10 button.
Example: Preset number = 12
I
4. Repeat steps 1 - 3 for further presetting.
To change the preset stations, repeat the same steps as above.
To Change the FM
Reception Mode
The "STEREO" indicator lights up and you can hear stereo effects,
when a program is broadcast in stereo.
However if an FM stereo broadcast is hard to receive or noisy, you
can select Monaural mode. Reception improves, but you lose any
stereo effect.
Press the TUNER BAND button to select FM
MONO mode.
The "MONO" indicator lights up on the display.
To restore the stereo effect, press the TUNER BAND button
to select FM Auto mode ("FM" appears on the display.). The "MO-
NO" indicator goes out.
Number key(s)
(hold for 2 seconds)
6
Advertisement
Table of Contents
