Radio Reception - JVC RC-EX30BC Instructions Manual

RADIO RECEPTION

Tuning in a station
1 Press BAND/TUNER to enter the tuner mode.
2 Press BAND/TUNER to select the band, FM or
AM.
3 Press and hold 4 or ¢ for more than 1 second.
The unit starts searching and stops when a station of
sufficient signal strength is tuned in.
If you press 4 or ¢ briefly and repeatedly, the
frequency changes step by step.
4 Adjust the volume.
Changing the FM reception mode
When an FM stereo broadcast is hard to receive or noisy,
reception improves in monaural reception.
Press FM MODE/BEAT CUT on the remote control
unit so that the MONO indicator appears in the
display window.
To restore the stereo effect, press the button again so
that the MONO indicator goes off.
FM MODE
/BEAT CUT
Note:
The FM reception mode setting will be canceled when
you tune in another station.
15
4 1,2
PUSH
REMOTE
DISPLAY
SENSOR
3
Using the antennas
FM
AM
Note:
The built-in ferrite core antenna may pick up interference
from television receivers in the neighborhood disturbing
AM reception.
3 1,2 4
STANDBY/ON CD/ TUNER/
RANDOM BAND TAPE
1 2 3
DISPLAY
4 5 6
HBS/
PRESET EQ
7 8 9
FM MODE OVER
/BEAT CUT
0
PROGRAM/ +
UP CLOCK SET INTRO
PRESET GROUP
REPEAT MUTING
–
DOWN
VOLUME
RM-SRCEX30J REMOTE CONTROL
PUSH
REMOTE
DISPLAY
SENSOR