Table of Contents
Advertisement
Chapter
Quick Installation
1
We know that many experienced people prefer to read as
little of the documentation as possible. If this sounds like
you, here's the short form to get up and running quickly.
Installing the Micronics C400
1. Make backup copies of your installation and configu-
2. Ground yourself to prevent damaging static dis-
STATIC!
Before
handling the
Micronics
3. Remove the Micronics C400 from its packaging.
C400, be
properly
4. Configure and verify the system board's jumper set-
grounded
by using a
special wrist
or ankle
5. Install the CPU and the system memory. Be sure to
strap, or
touch a
safely
grounded
object.
6. Install the system board in the chassis and make all
7. Install any ISA, PCI and/or AGP add-on peripherals
8. Connect any optional devices.
9. Turn the computer on and press the <DEL> key
Micronics C400 System Board Manual
ration diskettes.
charge by using an anti-static wrist or ankle strap, or
touch a safely grounded metal object.
tings (refer to Jumper Settings in Chapter 2).
attach the Retention Mechanism as described in
Chapter 3.
necessary case connections.
(refer to Chapter 2 for the location of the slots).
when you see the screen shown in Figure 1.1.
Chapter 1: Quick Installation
9
Advertisement
Table of Contents
