Jensen Elite-101 User Manual

Ultimate
The
Elite-101
Congratulations for buying the best In-Wall Speakers on the planet !
Please read this manual carefully understanding that advanced planning is essential.
Check for damage:
your units for any damage. If you find a problem please contact us immediately at
Supplied
:
Template
Break in Period:
Premium grade parts and materials are used in these Elite-101/202/303 products so maximum performance can be obtained in
damp and dusty environments such as wall and ceiling cavity. Break In period is appx 10-20 playing hours after which time Bass
will improve. There is no need to limit playback volume at all during this time.
Step 1: Advanced Planning
Decide the placement for your speakers. Advance planning in regards to the placement of your
speakers is critical. It is imperative that the wall or ceiling cavity be free from debris, moisture,
insulation, and any materials that are easily combustible. The mounting location must also be void of wall studs
or bracing in the location for the cutout. Adequate Wall Cavity depth (see above) to allow speakers to fit flush to
the wall or ceiling surface is important. If you are unsure of the contents of the wall in which you wish to mount
the speakers, Electronic Stud Finders work very well (see FIG 1), otherwise a professional installer can assist here.
In-Wall / In-Ceiling Speakers
Elite-202
We know you will be eager to install your new Speakers, however, please firstly inspect
Not supplied
Philips screw driver
Wall cut tool
Glass
Elite-303
See separate manual
info@bdimports.com.au
Depth required:
Elite-101 85mm
Elite-202 62mm
Elite-303 75mm
Stud Finder
FIG 1.
Elite-606
Wall Cavity
Stud Finder