Table of Contents
Advertisement
5.5 Seats
5.5.1 Rear Seat Fixings Positions
- Kombi
CAUTION: Do not install seats in the
rear cargo area of a Van.
Rear Floor Seat Fixing Positions
1
D
F
G
2
E74531
Item
1
Front Axle Center Line
2
Floor Height Step on Front wheel Drive Vehicles
3
Second Row Seat
4
Third Row Seat
Rear Floor Seat Fixing Position Dimensions (mm)
A
B
1787
1372
Cab Van Floor
NOTE: Cab Van Floor Models are currently only
available for use in Motor Caravan applications
FordTransit 2006.5 (April 2006 )
Date of Publication: 12/2006
A
B
C
E
3
Description
C
849
1312
the following figure shows the second and third
row seat fixing in the floor. These holes and
positions are independent of the wheelbase.
Refer to: 5.6 Glass, Frames and Mechanisms
(page 211).
4
D
E
434
Rear seats, if assembled at a Vehicle Converter
/ Modifier, need to be tested according to ECE
R14, 77/541/EEC and ECE R17 by them. It is
recommended to fix the seat frame at three
locations as shown in the following Figure
E74532 which shows the typical design principle
for Cab Van Floor seat frame fixings on top and
underneath the floor. Fixings should be carried
out as U-type bracket clinching the cross beam.
F
G
1048
752
209
Advertisement
Table of Contents
