Alfa Romeo A0B0364b User Manual page 62

Treble reduction function (HICUT)
Using this function it is possible to reduce
the treble tones and noise when reception
is bad. To turn the function on/off, use
"¯¯" (4) or "˙˙" (7).
The display will show the current status of
the function:
– "HICUT ON": function on
– "NO HICUT": function off.
Telephone volume adjustment
function (PHONE)
With this function it is possible to adjust
(setting from 1 to 66) or cut off (OFF set-
ting) the telephone sound.
To turn on/off, use "¯¯" (4) or "˙˙"
(7).
To adjust the sound, use "VOL+" (21)
or "VOL-" (19).
The display will show the current status of
the function:
– "PHONE 23": function on with vol-
ume setting 23
– "PHONE OFF": function off.
Allocating a name to a CD
(CD NAME)
This function can be chosen only if a Com-
pact Disc is inserted. To turn on, use "¯¯"
(4) or "˙˙" (7): the display will show
"CD-NAME". If the CD already has a
name, this will be shown on the display, if
not, eight dashes will be shown. If storage
is no longer available for a new name, the
display will show the first name stored.
To change the name or give a name to the
new CD press "¯¯" (4) or "˙˙" (7).
Press the buttons again to choose the posi-
tion of the character to be changed. Press
"L" (6) or "M" (8) to choose or change
the character.
To store the name, press the "MENU"
button again (9). The display will show
"CD-NAME".
To clear a name, turn the function on and
press "L" (6) or "M" (8) to choose the
name to be cleared, then press the
"MENU" button (9) for about 2 seconds.
The system beeps and the display shows
"ONE CLR" for about 2 seconds. At this
point the procedure can be started to give a
new name.
To clear all the names, turn the function
on and keep the "MENU" button (9)
pressed for about 4 seconds. The set gives
two beeps and the display shows "ALL
CLR" for about 2 seconds. At this point, it
is possible to start the name allocation pro-
cedure.
61