Table of Contents
Advertisement
– TA(*): the traffic information function
is on but the radio is tuned to a station that
does not give traffic information
– TA and TP not shown on the display:
the radio is tuned to a station that does not
give traffic information and the traffic infor-
mation function is off.
(*) If the TA traffic information function is on,
but the radio station chosen does not give traf-
fic information, the device beeps every 30 sec-
onds.
With the TA function (traffic information)
it is possible:
a) to search only RDS stations that trans-
mit in the FM band, enabled to broad-
cast traffic information
b) receive traffic information even if the
cassette player or CD-Changer is in use
c) receive traffic information at a prede-
fined minimum volume even with the
radio volume off.
24
The operations to be carried out for each
of the three above conditions are listed be-
low.
a) To receive stations enabled to broad-
cast traffic information:
– select band FM1, FM2 or FMT
– briefly press (less than 1 second) the
"AF-TA" button (1) so that the display
shows "TA".
– press the tuner buttons "˙˙" (9) or
"¯¯" (12).
To store stations with TA on, carry out the
storage operations (see "Manual station
storage").
b) If wishing to receive traffic informa-
tion when listening to a cassette or Compact
Disc, before inserting the cassette or start-
ing the CD-Changer, tune to a station en-
abled to broadcast traffic information (TP)
and activate the TA function. If while listen-
ing to the cassette or Compact Disc, this sta-
tion broadcasts traffic information, the tape
or Compact Disc will be suspended tem-
porarily and resumed again automatically
after the end of the message.
At the start of receiving traffic information
the display will briefly show the wording
"INFO TRA", while the display contin-
ues giving further information (frequency,
name, time of CD etc.).
If the cassette player or CD-Changer are al-
ready working and at the same time you
want to receive traffic information, briefly
pressing (less than 1 second) the "AF-TA"
button (1) the radio tunes to the last sta-
tion heard in the FM band, the TA traffic in-
formation function is activated and the traf-
fic messages are transmitted. If the station
selected does not send traffic information,
the search for an enabled station starts au-
tomatically.
If wishing to interrupt the traffic informa-
tion message, briefly press (less than 1 sec-
ond) the "AF-TA" button (1) during trans-
mission of the message.
c) To receive traffic information while not
listening to the radio:
– turn on the TA function briefly pressing
(less than 1 second) the "AF-TA" button
(1), so that the display shows "TA"
Hide quick links:
Advertisement
Table of Contents
