Table of Contents
Advertisement
Volume adjustment
Press the "VOL+" button (22) to in-
crease the volume or "VOL-" (20) to low-
er it.
Pressing the button briefly the change is
gradual by steps. Pressing longer, the
change is fast. For a few seconds the dis-
play shows the wording "VOL" and the vol-
ume level (from 0 to 66).
If the volume level is changed during the
broadcast of a traffic bulletin or during use
of the phone (if the voice feature is in-
stalled), the new setting is maintained on-
ly until the end of the bulletin or phone call.
Mute function (turning off
the volume completely)
To switch on the Mute function, briefly
press (less than 1 second) the "z" but-
ton (21). Volume will gradually lower (Soft
Mute function) and the display will show the
function selected and the word "MUTE".
To switch off the Mute function again press
the "z" button briefly again (21). The vol-
ume will gradually become louder (Soft
Mute function) returning to the value set be-
fore switching on the Mute function.
The Mute function is also switched off
pressing one of the volume adjustment but-
tons "VOL+" (22) or "VOL-" (20): in
this case the volume is changed directly.
With the Mute function on, all the other
functions can be used and if a traffic bul-
letin arrives with the TA function on or an
emergency alarm is received, the message
ignores the Mute function.
Soft Mute function
When the Mute function is turned on or
off, the volume lowers or increases gradu-
ally (Soft Mute function). The Soft Mute
function is also activated when one of the
six preselection buttons, the "BN" button
(7) or the "ON" button (21) is pressed.
17
Hide quick links:
Advertisement
Table of Contents
