Alfa Romeo A0B0364b User Manual page 61

– SENS DX/LO (Tuning sensitivity)
– CD (CD display setting)
– CDC (CD-Changer display setting, if in-
stalled)
– REG (Regional programmes)
– IGN TIME (Switching off mode).
To exit the menu function, press the
"MENU" button again (9).
Turning the equalizer on/off
(except versions with HI-FI BOSE
system)
The integrated equalizer can be turned on
or off. With the equalizer off, it is possible
to change the sound settings only adjust-
ing the bass ("BASS") and treble tones
("TREBLE"), while activating the function
makes it possible to obtain higher sound con-
trol since it is possible to operate separate-
ly on 7 frequency bands.
To turn the equalizer off, select "PRE-
SET" with "L" (6) or "M" (8).
60
To turn on the equalizer, select one of the
following with "L" (6) or "M" (8):
– "USER" (adjustment of the 7 equal-
izer bands that can be changed by the user)
– "CLASSIC" (predefined equalizer ad-
justment)
– "ROCK" (predefined equalizer adjust-
ment)
– "JAZZ" (predefined equalizer adjust-
ment).
After selecting the last adjustment set in
the Menu using "L" (6) or "M" (8), use
"˙˙" (7) or "¯¯" (4) to change it.
When one of the equalizer settings is on,
the display shows "EQ".
On versions with HI-FI BOSE system, ana-
logue equalizing in amplitude and phase of
the signal is done automatically by the am-
plifier.
Equalizer settings
(only if the equalizer is on)
To set a personal equalizer adjustment, use
"L" (6) or "M" (8) "USER"; the display
shows "EQ SET".
To change the equalizer settings, use
"˙˙" (7) or "¯¯" (4). The display
shows a graph with 7 bars, where each bar
represents a frequency for the left or right
channel. Choose the bar to be adjusted us-
ing "˙˙" (7) or "¯¯" (4); the bar cho-
sen starts to flash and it is possible to adjust
it using "L" (6) or "M" (8).
To store the new settings, press the
"MENU" (9) button again. The display still
shows "EQ SET".