Audio Codecs - Sangean WFT-2D Manual

Table of Contents

Advertisement

Audio codecs

Your radio supports a range of audio codecs which provide compatibility with a wide range of
Internet Radio stations. These also allow users to stream music from their computers or to play
directly from USB fl ash memory devices. Note that for any given audio codec, there are many
streaming protocols available, and thus even if an Internet Radio station uses a supported
format, this does not guarantee that every such station will work with your radio. The radio
stations database to which your radio connects is checked for compatibility so that most stations
should be playable without problems. Similarly when streaming media from a computer, while a
codec may be supported, there can be many subtle variations in formats, tagging schemes and
protocols (even within UPnP). In general your radio will play the supported formats with most
common UPnP servers.
Bit-Rates
The following table summarises the maximum supported bit-rates for the various audio formats
that are playable on your radio. Higher rates may be playable in some cases but performance of
the product may be affected.
Codec
Maximum supported rate
AAC (LC)
320 kbits/sec
FLAC (1)
1.5 Mbits/sec
LPCM (2)
1.536 Mbits/sec
MP3
320 kbits/sec
Real Audio
64 kbits/sec
WAV
1.536 Mbits/sec
WMA (3)
320 kbits/sec
All codecs support 2-channel (stereo) coded files only.
All codecs support sample rates up to 48 kbits/sec (includes 32 and 44.1 kbits/sec).
Files which have Digital Rights Management (DRM) protection applied will not be playable on
your radio.
(1) 16 and 24 bit samples are supported in FLAC files
(2) The maximum supported bit-rate is for a 48 kHz sampling, 2 channels and 16-bits per sample.
(3) WMA Lossless, WMA Voice, WMA 10 Professional, and files which have DRM protection are
not supported.
GB


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents