Sleep Timer - Sangean WFT-2D Manual

Sleep timer

Your radio can be set to turn off after a preset time has elapsed. The sleep timer setting can be
adjusted between 15 and 90 minutes in 15 minute increments.
From the home menu press the Settings mode button. The main settings menu will be
displayed.
Scroll through the menu and touch Miscellaneous settings.
Select Sleep. The current sleep time will be shown in yellow.
Touch to set the desired sleep time. The sleep timer can be set to between 15 and 60
minutes, or to Off.
Touch the Back button to return to the previous screen.
Your radio will switch into standby mode after the preset time has elapsed. An active sleep timer
is shown using a small timer indicator at the top of the playing displays. This indicator also shows
the sleep time remaining before the radio switches itself into standby mode. While the sleep timer
is in use, the backlight level will be set to the Standby setting. To cancel the sleep time before the
preset time has elapsed and to turn off the radio, press the On/Standby control to turn the unit
off manually. To cancel the sleep timer and leave the radio playing, go back into the sleep timer
settings and select the Off option. Alternatively, simply press the On/Standby control twice in
succession to cancel the timer and switch the radio back on again.
90
15:05 26 Jun 2010
Miscellaneous Settings
Language English
Alarm snooze 5 mins
Idle timeout 5 mins
Sleep 90mins
Settings
13:45
9 Jul 2010
Misoelianeous Settings
Sleep
Sleep time
Standby backlight andby backlight Neve Never
Softwe update ftwe update Enable Enabled
OFF
Check for upctates
Settings
GB
OFF