Navigation Controls - Sangean WFT-2D Manual

Navigation controls on the touch screen
This section describes the basic means of controlling your WFT-2D internet radio. Instructions for
each operating mode are given in the later sections of this book.
1. Pressing the On/Standby control brings your radio out of Standby mode. Pressing the On/Standby
control while the radio is in use will cause it to return to the Standby mode with the clock display.
2. Touching the Mode buttons on the Home menu screen gives you access to each of the operating
modes: DAB radio, FM radio, Internet radio, iPod, My Music, Auxiliary Input, Alarms and Settings.
3. Touch the Menu bar on screen to access a high level menu for the current operating mode.
Touching the bar a second time will normally cause the radio to revert to the previous display
or menu.
My Music
4. Touch the Home button to return to the main home menu.
5. Many operations require the user to make a selection from the menu. This is done by touching
the relevant item on the touch screen. If there are more than four items in a menu, then you
will need to touch the Up or Down arrows so that the additional items become visible. The sliding
scroll bar on the right will give an indication showing the current portion of the menu that is displayed.
Pressing the area between the arrow and the bar will cause the menu to scroll further if there
are many items. If there are many items in a menu, then the radio allows the menu to 'wrap
around' in either direction. This can make it easier to reach items at the end of a long menu,
such as a list of countries or Internet radio stations.
6. If an error is made when navigating the menus, it is generally possible to go back to a higher
level menu by pressing the Back button on the screen.
15:05 26 Jun 2010
Internet Radio
My Favourites
Local United King
BBC
Stations
Internet Radio
GB