Optional Connections; Universal Connection Cable For Echo Transducers (Option) - Simrad CX34-DE NavStation Installation Manual

Installation 1 - 22

1.10 Optional connections

SIMRAD
1.11 Universal connection cable for echo transducers
(Optional)
The universal connection cable should be applied when connecting one or two
transducers to either ECHO1 or ECHO2 port on CX44/54, or single transducer
to the ECHO port on CX34. Transducers for CX44/54 are recommended to be
60 to 80 ohms and minimum 1kW.
Connection cable (153-3004-002) Cable type AMW STYLE 2464
-Compass
-WR20 RemoteCommander
-Dual Station DS34/44/54-CX
-Performance Instruments
-Differential Beacon Receiver
-Water speed and temperature sensor
-Autopilot
-Yeoman digitizer
-PC - WPs & routes up/download
-Other equipment via SimNet, NMEA0183,
or NMEA2000.
Pin
1 Red
2 Black (brown) VCC speed 50kHz-
3 Blue
4 Shield
5 White (orange) Depth 1-
6 Green
7 Yellow
ECHO/1 ECHO2
50/200kHz 50&200kHz 38&200kHz
Speed log 50kHz+
Depth 1+ 200kHz+
Shield Shield
200kHz-
GND*
GND (Temp.) GND (Temp.)
Temp. Temp.
*) Temp./Speed log
CX34/44/54 NavStation
ECHO2
200kHz+
200kHz-
38kHz+
Shield
38kHz-
Temp.