Listening To Auxiliary Equipment; Using The Microphone/Guitar - JVC RV-NB10B Instructions Manual

■ ■

Listening to auxiliary equipment

AUX (D PLAYER)
You can listen to auxiliary equipment.
• First make sure that the auxiliary equipment is properly
connected to the system. (See pages 5 and 6.)
■
1.Set the volume level to minimum.
■
2.Press AUX (D PLAYER).
"AUX" appears on the display.
• To listen to the auxiliary equipment, start playing the auxiliary
equipment.
■ ■

Using the microphone/guitar

Microphone/guitar mixing
Using a microphone or a guitar (not supplied), you can mix its
sound with a source sound.
■
1.Make sure the MIC/GUITAR LEVEL control
on the rear of the system is properly set.
• When using a microphone, make sure the knob is pressed in
(_).
• When using a guitar, make sure the knob is released (—).
■
2.Set the MIC/GUITAR LEVEL control to MIN
by turning it fully counterclockwise.
■
3.Connect a microphone or a guitar into the
MIC/GUITAR INPUT jack on the rear of the
system.
■
4.Start a source: disc, tape, tuner, or other
equipment.
■
5.Adjust the VOLUME +/– control and the
MIC/GUITAR LEVEL control, as you play the
microphone or the guitar.
CAUTION: DO NOT connect a bass guitar to the
MIC/GUITAR INPUT jack, as it may damage the
system.
AUX (D PLAYER)
■
3.Adjust the volume to the desired listening
level.
■
4.Apply sound effects, if you wish.
• Adjust the super woofer volume to reinforce the bass sound.
Notes:
• For operation of the auxiliary equipment, refer to its instructions.
• While listening to a digital audio player...
Be sure turn down the volume of the system before changing to
another source, as high volume may output from the speakers.
Recording microphone or
guitar mixing on a tape
■
1.Follow steps –
■
2.To record, follow the steps in "Standard
recording." (See page 14.)
Note: If "howling" occurs when using the microphone, keep the
microphone away from the speaker.
on left column.
16