Fetch TV Set Top Box Quick Start Manual page 7

Connection Option 3 – PLC Adaptors
You can use this option if you cannot connect using Ethernet Cable and you ordered PLC Adaptors with your Fetch
TV service. The PLC adaptor will transmit your Fetch TV service to your STB using the existing power cables inside
your walls.
1. Plug one PLC adaptor into an electrical socket located near your broadband modem.
2. Plug one end of an Internet Ethernet cable into the port on the PLC device.
3. Plug the other end into any available port on your broadband modem.
4. Plug the other PLC adaptor into an electrical socket located near your TV and STB.
5. Plug one end of an Internet Ethernet cable into the port on the PLC device.
6. Plug the other end into the port labelled Internet on the back of your STB.
The PLC Adaptor should be plugged directly into the wall socket. Do not use a double adaptor or power board for
the PLC unless there is no other socket available, in which case they must not have surge protectors or noise
filtering. If using a power board, plug the PLC adaptor into the first outlet (the one nearest the cord).
Outside
Connecting with
PLC Adaptors
Broadband
Connection
Room 1
Fetch TV
Signal
PLC Adapter
Broadband
TV Aerial
Modem
Normal
Broadband
Use
Room 2
Fetch TV
Signal
AV
Cable
5