Table of Contents
Advertisement
Using your STB for the first time
1. It will take a few minutes for the STB to move
through three loading screens and the screen may
go black between each one. Don't worry, this is
normal. Once finished simply follow the instructions
on the Welcome Screen.
2. You'll be prompted to enter your Activation Code
which you will have received from your Service
Provider. Use the remote control to enter the code.
Activation codes are case sensitive, so you can
change the keyboard to upper case and back by
pressing the Text button. Press Done when finished.
3. Once entered, your code will be checked
and confirmed.
4. The next screen prompts you to set up your
Parental PIN. You can do this now by
following the on screen instructions or do it
later by accessing User in the Settings menu.
The default PIN is 0000.
5. The STB will then do a Channel Scan which may
take up to 5 minutes. When completed, follow the
on-screen instructions to proceed.
6. Next the box will perform a Diagnostic test and this
will take a few minutes to complete as well.
7. The final set up screen will take a few moments
to load and then the Fetch TV menu will appear on
the screen.
8. Fetch TV is now ready for you.
9. Visit
www.fetchtv.com.au
to download the Fetch
TV User Guide. It will help you get the most from
your Fetch TV service.
Audio Visual Settings
If your TV image appears out of proportion or stretched
you may need to configure the Display Resolution,
Aspect Ratio and Display Mode.
You do this by going to Main Menu > Manage >
Settings > Audio Visual.
Please do not turn off or reboot
your STB at any time during set up.
11
Hide quick links:
Advertisement
Table of Contents
