Functional Description - Bosch GBH 36 V-LI Compact Professional Original Operating Instructions

OBJ_BUCH-589-001.book Page 8 Monday, December 10, 2007 10:29 AM
8 | English
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack. Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e.g., al-
so against continuous sun irradiation and
fire. There is danger of explosion.
In case of damage and improper use of the
battery, vapors may be emitted. Provide for
fresh air and seek medical help in case of
complaints. The vapors can irritate the respi-
ratory system.
When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Use the battery only in conjunction with your
Bosch power tool. This measure alone pro-
tects the battery against dangerous overload.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.
Intended Use
The machine is intended for hammer drilling in
concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and
right/left rotation are also suitable for screw-
driving.
1 619 929 798 | (10.12.07)
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Depth stop
2 SDS-plus tool holder
3 Dust protection cap
4 Locking sleeve
5 Vibration damper
6 Rotational direction switch
7 On/Off switch
8 Selector switch for drilling/hammer drilling
9 Button for depth stop adjustment
10 Wing bolt for adjustment of auxiliary handle
11 Battery*
12 Battery release button
13 Temperature control indicator
14 Battery charge-control indicator
15 Button for charge-control indicator
16 Auxiliary handle
17 Securing screw for key type drill chuck*
18 Key-type drill chuck*
19 SDS-plus adapter shank for drill chuck*
20 Extraction sleeve of the dust extraction
attachment*
21 Clamping screw for the dust extraction
attachment*
22 Depth stop of the dust extraction
attachment*
23 Telescopic pipe of the dust extraction
attachment*
24 Wing bolt of the dust extraction attachment*
25 Guide pipe of the dust extraction
attachment*
26 Universal bit holder with SDS-plus shank*
*The accessories illustrated or described are not
included as standard delivery.
Bosch Power Tools