Door Swing; General Installation - U-Line U-BI1215S-00A Quick Start Manual

QUICK START GUIDE

Door Swing

1200 SERIES
Wall
1/4" Min.
(6 mm)
90°
Door Swing
Units have a zero clearance for the door to open 90°,
when installed adjacent to cabinets.
Stainless Steel and black and white models require 2-1/8"
(54 mm) door clearance to accommodate the handle if
installed next to a wall.
Integrated models require 1/4" (6 mm) clearance if
installed next to a wall. Allow for additional space for any
knobs or pulls installed on the integrated panel/frame.
BI SERIES
1/4" Min. (6 mm)
90°
Door Swing
All units have a zero clearance for the door to open 90°.
U-Line recommends a minimum door clearance of 1/4"
(6 mm) to accommodate the handle if the unit is installed
next to a wall.
Wall
2-1/8" Min.
(54 mm)
90°
Door Swing
MARINE SERIES
3/4" (19 mm) Min.
Door Swing
All units have a zero clearance for the door to open 90°.
U-Line recommends a minimum door clearance of 3/4"
(19 mm) to accommodate the handle if the unit is
installed next to a wall or similar type of structure.

General Installation

MARINE AND BI SERIES
LEVELING INFORMATION
NOTICE
It is extremely important that these units sit on
a level surface, as they do not have feet levelers.
If they are not level, the ice mold will not fill
evenly.
Use a level to confirm
the unit is level. Level
should be placed along
top edge and side edge
as shown.
7
u-line.com
Wall
90°
1