Disconnecting From A Network; Advanced Packet Data Configuration; Manually Adding A New Modem Connection - Psion Omnii User Manual

A home data connection is automatically set up.
• To connect to the Internet, tap on the Start>Internet Explorer icon.
Note: Any application that needs Internet access will establish a packet data connection – for
example, e-mail.
F.3.1

Disconnecting from a Network

To disconnect from the network:
• Tap on the navigation bar at the top of the screen, and then tap on the Phone Settings hotkey. In the
pop-up Phone bubble, tap on Wireless Manager.
• Tap on the Menu button in the softkey bar at the bottom of the Wireless Manager screen, and choose
Disconnect Cellular Data.
F.3.2

Advanced Packet Data Configuration

In most cases, when a GSM/GPRS/EDGE radio and SIM are installed in your hand-held, setup is automatic.
Follow the steps outlined under the heading "Establishing a Packet Data Connection" to make a connection.
The information in this section is for advanced setup purposes.
Manual configuration should only be necessary if:
• One or more parameters in the database are incorrect or a new operator is not yet in the database.
(The database should be corrected for subsequent software releases.)
• An operator has assigned individual GPRS user names and passwords.
• A very large site has its own Access Point Name (APN). Such connections must be
configured manually.
• A customer has subscribed for a static IP address. By definition this must be configured manually.
F.3.2.1

Manually Adding a New Modem Connection

• Tap on Start>Settings>Connections folder icon. Tap on the Connections icon.
Appendix F: Wireless Wide Area Network (WWAN)

Disconnecting from a Network

Psion Omnii Hand-Held Computer User Manual
F-5