Getting Started Using A Wireless Connection - Telkom Mega 200VWR Quick Start Manual

Getting Started using a wireless connection:

1. The Mega 200VWR's wireless access point name (SSID) is 'wlan-ap'. When you
scan for wireless networks using your wireless client, this is the name that will be
displayed.
2. To ensure wireless security "out-of-the-box", Telkom distributes each Mega
200VWR with a unique WPA pre-shared security key already setup on your router.
This pre-shared key secures your wireless connection from unauthorized use and
is printed on a sticker on the underside of the router.
3. In order to establish a wireless connection to the Mega 200VWR, you will need to
setup your wireless client (e.g. laptop with built in wireless module, wireless PCI
card or USB stick) with this WPA pre-shared key exactly as it is printed in the
sticker. Please consult the security section on your wireless client device manual
for instructions on how to do this.
4. Should you wish to alter this pre-shared key, please refer to page 34 of the online
user manual. To view the on-line manual, click on 'Start" , then "Run" and type
"D:\manual\manual.pdf" in the space provided (where D represents your CD
drive's drive letter)
5. For further assistance on setting up a wireless network please consult your
wireless client manual.
Mega 200VWR
TLK/200VWR-v1.0-060928
12