Kenwood DNN991HD Quick Start Manual page 16

• SD card (DNN991HD)
1) Press the <G> button for 1 second to open
the front panel.
2) Hold the SD card as the diagram below and
insert it into the slot until it clicks.
Playback starts.
⿠To remove:
1) Push the card until it clicks and then remove
your finger from the card.
The card pops up so that you can pull it out
with your fingers.
2
Control the music you are listening to on
the source control screen.
The following symbols indicate the keys on the
screen.
The functions of the keys are the same despite the
difference of the source you are listening to.
Z
⿠Basic operations from this screen
L
Plays or pauses.
I
Stops playing.
G
Disconnects the device.
E F
Searches the previous/next content.
16
ñ English
0
Touch [ ]
E F or move the cursor in the center
bar
Fast forwards or Fast backwards (Disc media,
CD, USB device, SD card only):
Repeats current content.
Plays all contents in random order.
✎
NOTE
• For other operations, refer to the Instruction Manual.
• If desired key is not displayed in the multi-function
bar, touch the [ ] to switch the menu.
3
Search the track/file you want to listen to.
⿠List search
1) Touch center of the screen.
The content list of the media being played
is displayed.
If the information of the current track only is
displayed, touch and hold [
the list display.
⿠Refined search
1) Touch [ ].
2) Touch the desired refinement method.
The list is refined by the item you selected.
3) Touch the desired item.
✎
NOTE
• For details on searching operations, refer to Search
Operation (P.74) in the Instruction Manual.
] to switch