Kenwood DNN991HD Quick Start Manual page 57

Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [
For details on operation, see
EXT SW
Control the external devices.
1 Touch [SET].
2 Set device name, output pattern, and pulse set for device. Then, touch [
For details on operation, see
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [
For details on operation, see
OEM SETUP (North America Sales area only)
This function requires a commercial adaptor.
Consult your Kenwood dealer for details.
DEMO
Set the demonstration mode. Default is "ON".
1 Touch [ON] or [OFF].
4
Touch [Finish].
NOTE
• These settings can be set from the SETUP menu. See
].
Panel color coordinate (P.135).
EXT SW setup (P.133).
].
Camera Setup (P.137).
Setting Up
Return to the Top page
].
(P.130).
Basic Operations
17