Philips FL9.1 Technical Training Manual page 31

I2C
I2S
IC Integrated Circuit
IF Intermediate Frequency
Interlaced Scan mode where two fields are used to form one frame. Each field contains
half the number of the total amount of lines. The fields are written in 'pairs',
causing line flicker.
IR Infra Red
IRQ Interrupt ReQuest
Last Status The settings last chosen by the customer and read and stored in RAM or in the
NVM. They are called at start-up of the set to configure it according the
customers wishes.
LCD Liquid Crystal Display
LED Light Emitting Diode
LINE-DRIVE Line drive signal
LVDS Low Voltage Differential Signalling, data transmission system for high speed
and low EMI communication.
MPEG Motion Pictures Experts Group
NVM Non Volatile Memory: IC containing TV related data (for example, options)
OSD On Screen Display
Progressive Scan
RAM
RC
RC5
RGB
RGBHV
ROM
SAM
SIF
SC
SCL
SDA
SDRAM
SIF
STBY
VGA
XTAL
YPbPr
Y/C
Y-OUT
Integrated IC bus
Integrated IC Sound bus
Scan mode where all scan lines are displayed in one frame at the same
time, creating a double vertical resolution.
Random Access Memory
Remote Control transmitter
Remote Control system 5, the signal from the remote control receiver
Red, Green, and Blue. The primary colour signals for TV. By mixing
levels of R, G, and B, all colors (Y/C) are reproduced.
Red, Green, Blue, Horizontal sync, and Vertical sync
Read Only Memory
Service Alignment Mode
Sound Intermediate Frequency
SandCastle: two-level pulse derived from sync signals
CLock Signal on I2C bus
DAta Signal on I2C bus
Synchronous DRAM
Sound Intermediate Frequency
STandBY
Video Graphics Array
Quartz crystal
Component video (Y= Luminance, Pb/Pr= Colour difference signals)
Luminance (Y) and Chrominance (C) signal
Luminance-signal
Page 29