Purge Control Solenoid Valve - Subaru 2002 IMPREZA Service Manual

Hide thumbs Also See for 2002 IMPREZA:

Table of Contents

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)

5. Purge Control Solenoid Valve

1) Disconnect the ground cable from battery.

2) Remove the bolt which installs purge control so-

lenoid valve onto intake manifold.

3) Take out the purge control solenoid valve

through the bottom of intake manifold.

4) Disconnect the connector and hoses from purge

control solenoid valve.

PURGE CONTROL SOLENOID VALVE

EC(w/oOBD)-8

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

16 N·m (1.6 kgf-m, 11.6 ft-lb)

Carefully connect the evaporation hoses.

A: To fuel pipe

B: To throttle body

C: INSPECTION

Make sure hoses are not cracked or loose.

Table of Contents

2001 impreza