IGNITION
3. Ignition Coil and Ignitor As-
sembly
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the spark plug cords from ignition
coil and ignitor assembly.
• 1600 cc MODEL
• 2000 cc and 2500 cc MODEL
3) Disconnect the connector from ignition coil and
ignitor assembly.
IGNITION COIL AND IGNITOR ASSEMBLY
G6M0095
EN1040
S6M0373
IG(w/oOBD)-8
4) Remove the ignition coil and ignitor assembly.
• 1600 cc MODEL
• 2000 cc and 2500 cc MODEL
B: INSTALLATION
1) Install in the reverse order of removal.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
CAUTION:
Be sure to connect the wires to their proper po-
sitions. Failure to do so will damage the unit.
• 1600 cc MODEL
EN1044
B6M0930
EN1044